|
| Zenith Grinding Series |
|
|
| High Pressure Raymond Mill |
 |
The Zenith High Pressure raymond Mill is suitable for grinding the barite, limestone, kaolnite, ceram and slags, etc. which below scale 9.3 of Moth and below 6% shadness and 280-odd sorts of non-inflammable and non-explosive stuff in the trades of mining, metallurgy, chemical engineering and building material for high fine powder generating and processing . The Product size is adjustable in the range of 80-425 mesh. It is possible to produce 30-80 mesh coarse powder through special device in the machine.
In the raymond mill's main frame, a 100-1500 kg powered pressure spring is fixed to the roller suspender. After the grinder is put into effect, the roller rotates around the main shaft, and rolls closely against the ring affected by the high pressure spring and centrifugal force. And its rolling pressure is 1.2 times higher than that of the Raymond grinder under the same power condition and the output is raised to a new degree. |
|
|
| |
| XZM Ultrafine Mill |
 |
The Zenith XZM Ultrafine mill is a new kind of machine for producing fineness and ultra-powder. The roller mill is mainly used for grinding the materials, whose hardness is middle and low, moisture below 6%, and its Moths hardness should be blow 9 grade and non-explosion and non-flammability, such as: calcite, chalk, limestone, dolomite, kaolin, bentonite, steatite, mica, magnetite, iolite, pyrophillite, vermiculite, meerschaum, attapulgite, diatomite, barite, gypsum, alunite, graphite, fluorite, phosphate ore, potassium ore pumice, etc. The size of the finished production can be adjusted between325-2500 mesh. |
|
| |
| MTM Trapezium Mill |
 |
The Zenith MTM Medium Speed Trapezium Mill is a leading-world-level industrial mill. The pulverizer is designed by our own engineers and technical workers, basing on industrial mill research of many years and adopting world-leading-powder processing technology. Our machine adopts many advantages from numbers of mill all over the world, such as trapeziums working surface, flexible connection, roll linked pressure boost, etc. The pulverizer has overcome the traditional mills defect completely in application, capacity, fineness, energy consumption, service life, etc. |
|
| |
| Ball Mill |
 |
The zenith Ball mill is the key equipment for grinding after the crushing process, which is widely used in the manufacture industries, such as cement, silicate, new building material, refractory material, fertilizer, ferrous metal, nonferrous metal and glass ceramics and can be used for the dry and wet grinding for all kinds of ores and other grind-able materials.
when you use the Ball Mill, the material to be ground is loaded into the Neoprene barrel that contains grinding media. As the barrel rotates, the material is crushed between the individual pieces of grinding media that mix and crush the product into fine powder over a period of several hours. |
|
| |
| STM Vertical Mill |
 |
The Zenith STM Vertical Mill is a new mill of high efficiency and low consumption, studied by numbers of our engineers, for solving the difficulty of high energy consumption in mill industry. It adopts new grinding principle, new structure, strong bearing materials, and absorbing lots of technical essence of mill. Therefore the performance of STM vertical mill indicators is over traditional mills greatly. Especially, it is very efficient for crushing high hardness and hardworking materials and it can work under both dry and wet condition. STM vertical mill has these characteristics: small metal worn, little dust, simple and firm structure, and easy maintenance. It is a revolutionary technical changing in mill industry. It can bring higher economic benefit to our customers and it really fulfills the desire of industrial fields. |
|
| |
|
|
